CHAPTER 2
T320 Router Release Notes
Outstanding Issues with the T320 Router
Related
Documentation
Errata with the T320 Router Documentation
Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Outstanding Issues with the T320 Router on page 11
Errata with the T320 Router Documentation on page 11
This topic lists outstanding issues with the T320 Core Router. For complete information
on the router, see the T320 Core Router Hardware Guide. For information about software
issues, see the Junos OS Release Notes.
The external clock inputs on the SONET Clock Generators (SCGs) are not supported
before Junos OS Release 10.4.
After powering on or off a power supply, wait at least 60 seconds before turning it back
off or on again.
After a power supply is powered on, it can take up to 60 seconds for status
indicators—such as LEDs on the power supply,
on the craft interface LCD —to indicate that the power supply is functioning normally.
Ignore error indicators that appear during the first 60 seconds.
Errata with the T320 Router Documentation on page 11
There are no outstanding issues with the T320 router documentation.
Outstanding Issues with the T320 Router on page 11
commands, and messages
show chassis
11