Connecting The T320 To Ground; Tools And Parts Required To Ground The T320 Router; Connecting The T320 Grounding Cable - Juniper Core Router T Series Hardware Manual

CHAPTER 19

Connecting the T320 to Ground

Tools and Parts Required to Ground the T320 Router

Related
Documentation

Connecting the T320 Grounding Cable

Copyright © 2018, Juniper Networks, Inc.
Tools and Parts Required to Ground the T320 Router on page 151
Connecting the T320 Grounding Cable on page 151
To ground the router, you need:
Grounding cable (which you must provide)
Grounding lug (provided with the router)
M6 screws or UNC 1/4-20 screws
Electrostatic discharge (ESD) grounding wrist strap
T320 Chassis Description on page 13
T320 Chassis Grounding Cable and Lug Specifications on page 93
Connecting the T320 Grounding Cable on page 151
Preventing Electrostatic Discharge Damage to a T320 Router on page 330
To meet safety and electromagnetic interference (EMI) requirements and to ensure
proper operation, the T320 router must be adequately grounded before power is
connected.
You must provide the grounding cables. For grounding cable specifications, see
Chassis Grounding Cable and Lug Specifications" on page
with the router includes the cable lug that attaches to the grounding cable and two
UNC 1/4–20 screws.
Two pairs of threaded inserts (PEM nuts) are provided on the right rear of the chassis for
connecting the router to earth ground. The left pair of grounding points fits M6 screws
(European), and the right pair fits UNC 1/4–20 screws (American). The grounding points
are spaced at 0.625-in. (15.86-mm) centers.
"T320
93. The accessory box shipped
151