Figure 110: Removing A T320 Power Supply; Figure 111: Rear Of The Power Supply Showing Midplane Connectors - Juniper Core Router T Series Hardware Manual

See Also
Copyright © 2018, Juniper Networks, Inc.
Twist the ejector handles on the upper corners of the faceplate counterclockwise to
10.
unseat the power supply.
Grasp the handle on the power supply faceplate and pull firmly to start removing the
11.
power supply. Slide it halfway out of the chassis (see
WARNING: Do not touch the power connectors on the rear of the power
supply (see Figure 111 on page
Place one hand underneath the power supply to support it and slide it completely out
12.
of the chassis.
CAUTION: Each power supply weighs approximately 12 lb (5.4 kg). Be
prepared to support the full weight of the power supply as you remove it
from the router.

Figure 110: Removing a T320 Power Supply

Figure 111: Rear of the Power Supply Showing Midplane Connectors

T320 Power System Description on page 83
Maintaining the T320 Power Supplies on page 284
Chapter 28: Replacing Power System Components
Figure 110 on page
251). They can contain dangerous voltages.
251).
251