See Also
Installing a Rear T320 Air Filter
Copyright © 2018, Juniper Networks, Inc.
Figure 77: Removing the Rear Air Filter Element
Preventing Electrostatic Discharge Damage to a T320 Router on page 330
T320 Cooling System Description on page 25
Maintaining the T320 Air Filters on page 274
Troubleshooting the T320 Cooling System on page 297
To install the rear air filter (see
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Holding the filter by the tabs, carefully push the filter all the way into the air filter slot.
2.
Holding the filter all the way in, push it to the right side of the slot until it is held in
3.
place behind the hooks.
Move the tabs to a vertical position.
4.
Chapter 25: Replacing Cooling System Components
Figure 78 on page
198):
197