T320 Fpc Edges; Figure 23: Fpc Online/Offline Button On The Craft Interface; Figure 24: Fpc Edges; Line Card Components And Descriptions - Juniper Core Router T Series Hardware Manual

Figure 23: FPC Online/Offline Button on the Craft Interface

T320 FPC Edges

Copyright © 2018, Juniper Networks, Inc.
Two LEDs, located on the craft interface above the FPC, that display the status of the
FPC. For more information on the FPC LEDs, see
page 23.
FPC online/offline button, located on the craft interface above the FPC (see
Figure 23 on page 63.
Regardless of whether you are holding an FPC vertically or horizontally, this documentation
uses the same terms for all four edges of the FPC (see
Faceplate—Edge of the FPC that has slots into which you insert the PICs
Connector edge—Edge opposite the faceplate; this edge has the connectors that attach
to the midplane
Top edge—Edge at the top of the FPC when it is vertical
Bottom edge—Edge at the bottom of the FPC when it is vertical

Figure 24: FPC Edges

Chapter 6: Line Card Components and Descriptions
"T320 Craft Interface FPC LEDs" on
Figure 24 on page 63):
63