Management Cable Specifications And Pinouts; T320 Routing Engine Interface Cable And Wire Specifications; Table 56: Cable And Wire Specifications For Routing Engine Management And - Juniper Core Router T Series Hardware Manual

CHAPTER 12
Management Cable Specifications and
Pinouts

T320 Routing Engine Interface Cable and Wire Specifications

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
T320 Routing Engine Interface Cable and Wire Specifications on page 103
T320 DB-9 Connector Pinouts for the Routing Engine AUXILIARY and CONSOLE
Ports on page 104
Table 56 on page 103 lists the specifications for the cables that connect to management
ports and the wires that connect to the alarm relay contacts.
Table 56: Cable and Wire Specifications for Routing Engine Management and Alarm
Interfaces
Port Cable Specification
Routing Engine RS-232 (EIA-232) serial
console or cable
auxiliary
interface
Routing Engine Category 5 cable or
Ethernet equivalent suitable for
interface 100Base-T operation
Alarm relay Wire with gauge
contacts between 28-AWG and
14-AWG (0.08 and 2.08
2
mm )
Replacing the T320 Connections to Routing Engine Interface Ports
T320 Routing Engine Description on page 33
Cable/Wire Maximum
Supplied Length
One 6-ft (1.83-m) 6 ft
length with (1.83 m)
DB-9/DB-9
connectors
One 15-ft (4.57-m) 328 ft
length with (100 m)
RJ-45/RJ-45
connectors
NO None
Router
Receptacle
DB-9 male
RJ-45
autosensing
—
103