M40E Connector Interface Panel (Cip) Description; Figure 24: Connector Interface Panel - Juniper M40E Hardware Manual

M40e Connector Interface Panel (CIP) Description

Copyright © 2010, Juniper Networks, Inc.
The Connector Interface Panel (CIP) is located at the left side of the FPC card cage, as
shown in "M40e Chassis Description" on page 8. It houses Routing Engine management
ports and alarm relay contacts, as shown in Figure 24 on page 39.

Figure 24: Connector Interface Panel

The CIP is located on the left side of the M40e and M160 router Flexible PIC Concentrator
(FPC) card cage (see Figure 25 on page 40).
Chapter 2: M40e Hardware Components
39