Figure 120: Do Not Grasp The Connector Edge - Juniper Core Router T Series Hardware Manual

Copyright © 2018, Juniper Networks, Inc.
NOTE: An FPC configured with PICs installed can weigh as much as 29 lb
(13.2 kg). Be prepared to accept the full weight of the FPC as you lift it.
To prevent damage when handling or carrying FPCs:
As you carry the FPC, do not bump it against anything. FPC components are fragile.
Do not grasp the FPC anywhere except places that this document indicates. In particular,
never grasp the connector edge, especially at the power connector in the corner where
the connector and bottom edges meet (see

Figure 120: Do Not Grasp the Connector Edge

Do not carry the FPC by the faceplate with only one hand (see
Chapter 31: Maintaining Components
Figure 120 on page 279).
Figure 121 on page 280).
279