Figure 78: Installing The Rear Air Filter - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
See Also
Related
Documentation
198
Place the right edge of the honeycomb against the flange of the air filter slot.
5.
Line up the holes at the top, center, and bottom of the honeycomb with the pins in
6.
the slot, and press the honeycomb into place.
Replace the air filter cover.
7.
Firmly tighten the captive screws at the top, center, and bottom of the filter cover to
8.
secure it to the chassis, using a Phillips (+) screwdriver, number 2.

Figure 78: Installing the Rear Air Filter

Preventing Electrostatic Discharge Damage to a T320 Router on page 330
Maintaining the T320 Air Filters on page 274
T320 Cooling System Description on page 25
Troubleshooting the T320 Cooling System on page 297
Preventing Electrostatic Discharge Damage to a T320 Router on page 330
T320 Cooling System Description on page 25
Maintaining the T320 Air Filters on page 274
Troubleshooting the T320 Cooling System on page 297
Copyright © 2018, Juniper Networks, Inc.