Holding And Storing T320 Fpcs; Holding T320 Fpcs - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
user@host> show chassis fpc
Temp CPU Utilization (%)
Slot State (C) Total
0 Online 25 3
1 Online 25 2
2 Empty 0 0
3 Empty 0 0
4 Empty 0 0
5 Empty 0 0
6 Empty 0 0
7 Empty 0 0
user@host> show chassis fpc detail 0
Slot 0 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time:
Uptime:
Related
Documentation

Holding and Storing T320 FPCs

Holding T320 FPCs

278
The green LED blinks during startup.
OK
Issue the CLI
show chassis fpc
shown in the sample output, the value
that the FPC is functioning normally:
Memory
Interrupt DRAM (MB) Heap
0 256
0 256
0 0
0 0
0 0
0 0
0 0
0 0
For more detailed output, add the
a slot number ( 0 ), which is optional:
Online
25 degrees C / 77 degrees F
256 MB
56 MB
1280 MB
2003-10-01 04:19:30 PDT
10 days, 7 hours, 16 minutes, 48 seconds
For further description of the output from the commands, see show chassis fpc.
T320 Chassis Description on page 13
T320 Flexible PIC Concentrators (FPCs) Description on page 61
T320 Craft Interface FPC LEDs on page 23
Holding T320 FPCs on page 278
1.
Storing T320 FPCs on page 282
2.
CAUTION: Many components on the FPC are fragile. Failure to handle FPCs
as specified in this document can cause irreparable damage.
command to check the status of installed FPCs. As
Online in the column labeled
Utilization (%)
Buffer
14 41
7 41
0 0
0 0
0 0
0 0
0 0
0 0
option. The following example also specifies
detail
State indicates
Copyright © 2018, Juniper Networks, Inc.