T320 Db-9 Connector Pinouts For The Routing Engine Auxiliary And Console Ports; Table 57: Db-9 Connector Pinouts - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide

T320 DB-9 Connector Pinouts for the Routing Engine AUXILIARY and CONSOLE Ports

Related
Documentation
104
The ports on the CIP labeled
RS-232 (EIA-232) cable. The
modem, or other auxiliary unit, and the
console. The ports are configured as data terminal equipment
describes the DB-9 connector pinouts.

Table 57: DB-9 Connector Pinouts

Pin Signal
1 DCD
2 RxD
3 TxD
4 DTR
5 Ground
6 DSR
7 RTS
8 CTS
9 RING
T320 Connector Interface Panel (CIP) Description on page 16
T320 Routing Engine Ports on page 39
T320 Site Preparation Checklist Requirements on page 89
and
AUXILIARY CONSOLE
port connects the Routing Engine to a laptop,
AUXILIARY
CONSOLE port connects it to a management
Direction Description
<– Carrier Detect
<– Receive Data
–> Transmit Data
–> Data Terminal Ready
— Signal Ground
<– Data Set Ready
–> Request To Send
<– Clear To Send
<– Ring Indicator
are DB-9 receptacles that accept
(DTE).Table 57 on page 104
Copyright © 2018, Juniper Networks, Inc.