Installing A T320 Fpc - Juniper Core Router T Series Hardware Manual

Hide thumbs Also See for Core Router T Series:
Table of Contents

Advertisement

T320 Core Router Hardware Guide
See Also

Installing a T320 FPC

236
T320 Flexible PIC Concentrators (FPCs) Description on page 61
Holding and Storing T320 FPCs on page 278
Preventing Electrostatic Discharge Damage to a T320 Router on page 330
To install an FPC (see
Figure 104 on page 238
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis. For more information about ESD,
see
"Preventing Electrostatic Discharge Damage to a T320 Router" on page
Place the FPC on an antistatic mat.
2.
Take each PIC to be installed in the replacement FPC out of its electrostatic bag and
3.
identify the slot on the FPC where it will be connected.
Verify that each fiber-optic PIC has a rubber safety cap covering the PIC transceiver.
4.
If it does not, cover the transceiver with a safety cap.
Install each PIC into the appropriate slot on the FPC. For information on installing a
5.
PIC, see
"Installing a T320 PIC" on page
Locate the slot in the FPC card cage in which you plan to install the FPC.
6.
Lift the FPC into place and carefully align first the bottom, then the top of the FPC
7.
with the guides inside the card cage. Be sure the FPC is right-side up, with the
components on the right of the FPC.
CAUTION:
When the FPC is out of the chassis, do not hold it by the ejector
handles or edge connectors. They cannot support its weight.
Slide the FPC all the way into the card cage until you feel resistance.
8.
Starting with the ejector handles on the FPC faceplate nearly horizontal, simultaneously
9.
turn both ejector handles clockwise to seat the FPC.
If you are installing a Type 2 FPC or Type 3 FPC, tighten the screws inside the ejector
10.
handles to secure the FPC. Do not overtighten them.
If any of the PICs on the FPC connect to fiber-optic cable, remove the rubber safety
11.
cap from each transceiver and cable.
and
Figure 105 on page
242.
Copyright © 2018, Juniper Networks, Inc.
239):
330.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Core router t320

Table of Contents