See Also
Copyright © 2018, Juniper Networks, Inc.
Press the PIC offline/online button until the status LED on the PIC lights green. For
a Type 4 or Type 5 PIC, use a narrow-ended tool that fits inside the opening that
leads to the button.
For more information about the PIC LEDs, see the T4000 Core Router Interface
Module Reference.
Issue the following CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
The normal functioning status LED confirms that the PIC is online. You can also verify
correct PIC functioning by issuing the
Figure 121: Installing a PIC
T4000 PIC Description on page 62
Maintaining T4000 PICs on page 338
Chapter 30: Replacing Line Card Components
show chassis fpc pic-status
command.
305