Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
slightly beneath the faceplate of the PIC. For a PIC installed in a Type 2 FPC or Type
3 FPC, use a narrow-ended tool that fits inside the opening that leads to the button.
Issue the following CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see request chassis pic.
The normal functioning status LED confirms that the PIC is online. You can also verify
correct PIC functioning by issuing the
Figure 168: Installing a PIC
T640 Preventing Electrostatic Discharge Damage on page 506
T640 PIC Description on page 79
Maintaining T640 PICs and PIC Cables on page 454
Troubleshooting the T640 PICs on page 475
Chapter 28: Replacing Line Card Components
show chassis fpc pic-status
command.
345