Related
Documentation
Installing an MX240 AS MLC
Copyright © 2017, Juniper Networks, Inc.
Figure 100: Installing a PIC
MX240 PIC Description on page 59
Maintaining MX240 PICs on page 395
Troubleshooting the MX240 PICs on page 410
Replacing an MX240 FPC on page 302
Removing an MX240 PIC on page 316
Preventing Electrostatic Discharge Damage to an MX240 Router on page 444
MX240 PIC Serial Number Label on page 427
You can install up to five Application Services Modular Line Cards (AS MLCs) horizontally
in the front of the MX240 router. The AS MLCs are hot-insertable and hot-removable.
An empty AS MLC weighs 10.5 lb (4.76 kg). A fully configured AS MLC can weigh up to
15.27 lb (6.93 kg). Be prepared to accept its full weight.
To install an AS MLC (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Place the AS MLC on an antistatic mat.
2.
Figure 101 on page
251):
Chapter 21: Installing Components
249