Figure 101: Installing The Rear Air Filter - Juniper T4000 Hardware Manual

T4000 Core Router Hardware Guide
See Also
264
Place the right edge of the honeycomb against the flange of the air filter slot.
5.
Line up the holes at the top, center, and bottom of the honeycomb with the pins in
6.
the slot, and press the honeycomb into place.
Replace the air filter cover.
7.
Firmly tighten the captive screws at the top, center, and bottom of the filter cover to
8.
secure it to the chassis, using a Phillips (+) screwdriver, number 2.

Figure 101: Installing the Rear Air Filter

Copyright © 2018, Juniper Networks, Inc.