Replacing An M320 Fan Tray; Removing An M320 Front Fan Tray; Figure 75: Installing The Rear Air Filter - Juniper M320 Hardware Manual

Related
Documentation

Replacing an M320 Fan Tray

Removing an M320 Front Fan Tray

Copyright © 2010, Juniper Networks, Inc.
Replace the air filter cover.
6.
Firmly tighten the captive screws at the top, center, and bottom of the filter cover to
7.
secure it to the chassis, using a Phillips (+) screwdriver, number 2.

Figure 75: Installing the Rear Air Filter

Preventing Electrostatic Discharge Damage to an M320 Router on page 214
M320 Cooling System Description on page 37
Maintaining the M320 Fan Trays on page 111
Maintaining the M320 Air Filters on page 110
Troubleshooting the M320 Cooling System on page 129
Removing an M320 Front Fan Tray on page 153
Installing an M320 Front Fan Tray on page 155
Removing an M320 Rear Fan Tray on page 156
Installing an M320 Rear Fan Tray on page 157
The router has two front fan trays. The front fan trays install horizontally in the front of
the chassis. Each front fan tray contains four fans. The two front fan trays are
Chapter 13: Replacing the M320 Router Hardware Components
153