Bico Technology: Interconnecting Signals - Siemens SINAMICS Series Operating Instructions Manual

Hide thumbs Also See for SINAMICS Series:

Table of Contents

9.1 Basic information

Safely removing a memory card

Removing the memory card must be requested using p9400.

p9400 = 100 Feedback: "It is not possible to safely remove the memory card"

If the memory card is removed without a request being made, this can destroy the file

system on the memory card.

BICO technology: Interconnecting signals

Every drive contains a large number of interconnectable input and output variables and

internal control variables.

The drive unit can be adapted to a wide range of requirements using BICO technology

(Binector Connector Technology).

Digital and analog signals, which can be interconnected as required by means of BICO

parameters, are identified by the prefix BI, BO, CI, or CO in their parameter name.

These parameters are identified accordingly in the parameter list or in the function diagrams.

The STARTER commissioning tool is recommended when using BICO technology.

Request to "safely remove" the memory card

Feedback: "You can safely remove the memory card"

Remove the memory card

SINAMICS DCM is accessing the memory card. Leave the memory card in the

unit and try again later.

Message: No memory card inserted

SINAMICS DCM DC Converter

Operating Instructions, 12/2018, A5E34763375A