M800W/M80W Series Connection and Setup Manual
12 Connection of Remote I/O Unit
12.7 Connecting with Machine Control Signal
(FCU8-DX213 / FCU8-DX213-1 / FCU8-DX654 / FCU8-DX654-1)
[FCU8-DX213 / FCU8-DX213-1 / FCU8-DX654 / FCU8-DX654-1]
<Applicable cable>
Solid wire
Twisted wire
Bar terminal with insulation collar
Bar terminal without insulation collar
<Wire mounting tool type>
Screwdriver
Manufacturer
<Bar terminal type>
Bar terminal
Manufacturer
<Related items>
Connector pin assignment: "General Specifications: Remote I/O Unit" (CJ35/CJ36/SDI/SDO connector)
CAUTION
1. Connect the cable to the designated connector. Incorrect connections could damage the device.
2. Do not connect or disconnect the connection cables between each unit while the power is ON.
FCU8-DX213 / 213-1 :
CJ35
FCU8-DX654 / 654-1 :
2
: 0.08 - 1.5 mm
SDI
2
: 0.08 - 1.5 mm
2
: 0.25 - 0.75 mm
2
: 0.25 - 1.0 mm
: 210-719
FCU8-DX213 / 213-1 :
: WAGO
CJ36
FCU8-DX654 / 654-1 :
SDO
: 216 series
: WAGO
323
IB-1501268-K