Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
41 Appx.4: EMC Installation Guidelines
41.6.4 Selection of Stabilized Power Supply
Consider the following characteristics when selecting the stabilized power supply (prepared by machine manufacturer).
Use a power supply that complies with CE Marking or that follows the safety standards given below.
Stabilized power supply selection items
Item
Voltage fluctuation
Ripple noise
Output
Spike noise
Output current
Output holding time
Standards
Safety Standards: UL1950, CSA C22.2 No. 234 approved, IEC950 compliant
Noise Terminal Voltage: FCC Class A, VCCI-Class A
High Harmonics Current Restrictions: IEC61000-3-2
Standard setting
±5%
±5% or less of 24VDC output
120 mV
(maximum)
500 mV
(maximum)
Refer to the maximum current consumption of the unit in use
――
and calculate.
20 ms (min)
Instantaneous power failure time (AC side)
637
Remarks
IB-1501268-K
Advertisement
Table of Contents
