Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
4 General Specifications
[Connector]
(3)
(14)
(4)
Connector
No.
name
(1)
LVDS1
(2)
LVDS2
(3)
INV
(4)
MENUKEY
(5)
USB2-1
(6)
USB2-2
(7)
USB2-3
(8)
USB2-4
(9)
USB2-5
CAUTION
Do not apply any voltage to the connectors other than voltage specified in this manual. Failure to observe this
could cause bursting, damage, etc.
Connect the cables to the designated connectors. Incorrect connections could damage the device.
12V, 5V, and 3.3V output from connectors are to supply the power for dedicated peripheral devices. Do not
use for other equipment to supply the power since we do not guarantee the NC operation by voltage down or
noise sneaking.
(1) LVDS1 (Display unit signal I/F 1st ch)
(2) LVDS2 (Display unit signal I/F 2nd ch)
(3) INV (LED backlight connection)
(4) MENUKEY (Menu key I/F)
IB-1501268-K
(15)
(2)
(13)
(18)
Function
Display unit signal I/F 1st ch
Display unit signal I/F 2nd ch
LED backlight connection
Menu key I/F
USB 2.0 I/F 1st ch
USB 2.0 I/F 2nd ch
USB 2.0 I/F 3rd ch
USB 2.0 I/F 4th ch
USB 2.0 I/F 5th ch
(1)
Connector
No.
name
(10) USB2-6
USB 2.0 I/F 6th ch
(11) USB3-1
USB 3.0 I/F 1st ch
(12) USB3-2
USB 3.0 I/F 2nd ch
(13) ON/OFF
Power supply ON/OFF I/F
(14) DCIN
24VDC input
Built-in disk connection of display
(15) CFAST
unit
(16) LAN
Ethernet I/F
Ethernet I/F for control unit
(17) GDI
connection
Operation panel I/O unit
(18) KEYUSB
connection
72
(16)
(17)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Function
Advertisement
Table of Contents
