Setting Dip Switch - Mitsubishi Electric M800W Series Connection And Set Up Manual

M800W/M80W Series Connection and Setup Manual
20 Setting the Hardware
<Power supply unit>
MDS-E/EH-CV setting

20.1.2 Setting DIP Switch

As a standard setting, turn the all DIP switches OFF.
CAUTION
An axis set unused is not included in the functional safety.
Power supply unit
(MDS-E/EH-CV)
Rotary switch setting
0
1 ～ 3
4
5 ～ F
The switches are OFF when facing bottom as illustrated.
S axis Setting unused axis
M axis Setting unused axis
L axis Setting unused axis
Setting items
Normal setting
Setting prohibited
External emergency stop setting
Setting prohibited
Unused axis can be set by turning the switches ON.
When there is unused axis for the drive unit,
set unused axis.
413 IB-1501268-K