Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
12 Connection of Remote I/O Unit
AI : DFMC1,5/12-ST-3,5-LR (Phoenix Contact)
<Applicable cable>
Solid wire
Twisted wire
Bar terminal with insulation collar
Bar terminal without insulation collar : 0.25-1.5mm
Stripping line length
<Wire mounting tool (driver) type>
Type
: SZS 0,4X2,5 VDE
Manufacturer: Phoenix Contact
<Bar terminal type>
Type
: AI series
Manufacturer: Phoenix Contact
<Crimp tool type>
Type
: CRIMPFOX 6
Manufacturer: Phoenix Contact
<Recommended cable with shield material>
Type
: HK-SB/20276XL LF
Manufacturer: Taiyo Cabletec
(Select the wire diameter from AI connector specification.)
Maximum cable length is 50m. Line resistance is 10Ω or less, and line resistance difference is 0.1Ω or less (see below).
Machine
side
- Line resistance of conducting wire A and B is 10Ω or less.
- Line resistance difference between conducting wire A and B is 0.1Ω or less.
Resistance
temperature
detector
- Line resistance of conducting wire A, B C and D is 10Ω or less.
- Each line resistance difference between conducting wire A, B C and D is
0.1Ω or less.
2
: 0.2-1.5mm
2
: 0.2-1.5mm
2
: 0.25-0.75mm
2
: 10mm
FCU8-DX409 : AI
Conducting wire A
Conducting wire B
Conducting wire A
Conducting wire B
Conducting wire C
Conducting wire D
339
Connector for analog input
IB-1501268-K
Advertisement
Table of Contents
