Communication Expansion Unit - Mitsubishi Electric M800W Series Connection And Set Up Manual

M800W/M80W Series Connection and Setup Manual
5 Installation

5.3.7 Communication Expansion Unit

Connect the communication expansion unit to the expansion slot 3 (EXT3) or expansion slot 4 (EXT4) of the control unit.
Install the communication expansion unit as follows:
(1) Push the tabs at the top and bottom of the cover attached to the expansion slot of the control unit.
(2) Remove the cover of the expansion slot.
(3) Insert the expansion unit into the expansion slot.
The expansion unit is fixed with the tabs.
(1)
IB-1501268-K
(2)
232
(3)