M800W/M80W Series Connection and Setup Manual
33 Synchronous Control and Multiple-axis Synchronization Control
There are 3 types of synchronous control as follows:
(1) Position command synchronous control
This is used when the machine's rigidity is low.
This conforms the position command of the master axis to that of the slave axis using the synchronous control
function of NC and drive those axes in parallel.
This can be used only by changing the NC setting, without changing the settings in the servo drive unit.
Position command synchronous control diagram
CNC
Position
command
The position command synchronous control has the following configuration:
Position command synchronous
control
Compensation
Drive unit
Compensation
Drive unit
Synchronous
control mode
Correction mode
Master axis
M
Detector
Slave axis
M
Detector
575
Synchronous operation
Independent operation
IB-1501268-K