Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
18 Cable
18.1 Symbols for Writing Cable Drawings
(1)
(2)
(3)
(4) In the cable drawings, the partner of the twisted pair cable is given a priority, so please be aware that the pin No. of
the connectors at both ends are not necessarily in sequential order.
(5) Equivalent parts can be used for the connector, contact and wire material.
(6) The tolerances of the cables provided by MITSUBISHI are as follows:
Cable length (mm)
10001 ～ 15000
15001 ～ 20000
IB-1501268-K
indicates twisted pair.
indicates the shield sheath.
indicates shield clamping to the grounding plate.
～ 600
601 ～ 1000
1001 ～ 5000
5001 ～ 10000
Tolerances (mm)
±30
±50
±100
±150
±200
±300
370
Advertisement
Table of Contents
