Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
22 Setting the Parameters and Date/Time
22.4 Setting Date and Time
(1) Select [Time] on the Monitr screen.
(2) Select [Time setting] on the integrated time screen.
The time setting mode is entered. The cursor appears at the "#1 Date" position in the Run-out time display.
(3) Set the date and time to "#1 Date" and "#2 Time" respectively.
(4) Select [Selfdia] on the diagn screen.
(5) Select [Battery clear] on the self diagn screen, and set the battery used years to "0".
(Note)
If battery used years is not cleared, passed years from default date (2014/4/1) will be displayed on battery
used years.
IB-1501268-K
452
Advertisement
Table of Contents
