Mitsubishi Electric M800W Series Connection And Set Up Manual page 84

M800W/M80W Series Connection and Setup Manual
4 General Specifications
[LED]
No. Name
(1) 24VDCIN
(2) DCOUT
(3) READY
(4) ERR
(5) SDACC
Cover opened
Lamp state
Lit (Green) 24V power is being supplied from the external power supply.
The following may have caused an error:
- No 24V-power supply from the external power supply.
Not lit
- Disconnection of fuse near DCIN connector.
- Failure of LED.
The followings are all successfully output; 5V and 3.3V generated from 24V;
Lit (Green)
2.5V,1.8V,1.5V,1.15V, and 1.1V on the main card.
The followings may have caused an error:
- No 24V-power supply from the external power supply.
Not lit
- Failure in any of the power output circuits.
- Failure of LED or IC which helps turn the LED ON.
Lit (Green) Servo ON (or ready ON) state.
Not lit Servo OFF (or ready OFF) state.
H/W is not operating properly. The followings may have caused an error:
Lit (Red) - Occurrence of NC watchdog error.
- Failure of main CPU card.
Not lit H/W is operating properly.
Flashing (Green) Accessing to front side SD card.
Not lit Not accessing to front side SD card.
45
Details
IB-1501268-K
(1)
(2)
(3)
(4)
(5)