Built-In Disk Of The Display Unit (Fcu8-Cf001-001) - Mitsubishi Electric M800W Series Connection And Set Up Manual

M800W/M80W Series Connection and Setup Manual
4 General Specifications

4.7.2 Built-in Disk of the Display Unit (FCU8-CF001-001)

[Outline dimension]
[Precautions for handling]
(1) Precautions for use
(a) Turn the MITSUBISHI device's power OFF before inserting or removing a built-in disk of the display unit.
(b) To avoid troubles such as a data loss, do not pull out the built-in disk of the display unit or turn the power
OFF during access to the built-in disk of the display unit.
(c) The built-in disk slot of the display unit for the personal computer unit is provided with the mechanism
which locks the built-in disk of the display unit. Make sure to lock to prevent fall of the built-in disk of the
display unit.
(d) Do not touch the connector section. Because the built-in disk of the display unit is the semiconductor
product, take a countermeasure against static electricity at the time of handling.
(e) Turn the power OFF according to "(2) To turn the power OFF" under the section "Connection: Turning the
Power ON/OFF". If the power is turned OFF forcibly, the files may be corrupted.
(2) Data backup in built-in disk of the display unit
Backup must be regularly performed by the user.
MITSUBISHI will replace a built-in disk of the display unit, however MITSUBISHI will not take any responsibility
for the damage caused by a data loss.
IB-1501268-K
42.8 3.3
78