Remote I/O Unit Connection System Drawing - Mitsubishi Electric M800W Series Connection And Set Up Manual

M800W/M80W Series Connection and Setup Manual
12 Connection of Remote I/O Unit
This chapter describes the connection of the remote I/O unit and machine control signals.

12.1 Remote I/O Unit Connection System Drawing

Remote I/O unit
J070/J071
DCIN
J210
RIO1
J210
RIO2
J350/J351
CJ31/CJ33
J350/J351
CJ32/CJ34
CJ35
CJ36
SDI
SDI1/SDI2
SDO
SDO1/SDO2
J221
AIO1
THERMISTOR
AI
(Note 1) The mounted connector differs depending on the unit. Refer to the following chapter for which of the connector
is mounted.
"General Specifications: Remote I/O unit"
(Note 2) For the connection of machine operation panel, refer to the chapter "Connection of Machine Operation Panel".
IB-1501268-K
cable
24VDC Stabilized
power supply
Previous stage's remote I/O
cable
Remote I/O unit,
Control unit,
etc.
Next stage's remote I/O or terminator
cable
Remote I/O unit,
Operation panel I/O unit,
etc.
cable
Machine control panel,
etc.
cable
Machine control panel,
etc.
Machine control panel,
etc.
Machine control panel,
etc.
Machine control panel,
etc.
Machine control panel,
etc.
cable
Analog I/O
Thermistor
Multi-analog input
312