Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
40 Appx.3: Displaying Original Logo On Standard Screen
A logo that machine tool builders create can be displayed on the upper left of the standard screen. In order to display the
logo, create a logo file (JPG) and install it. When a logo file is prepared by machine tool builders, the unit name (Base
common parameter #1135 unt_nm) is not displayed.
Logo display position
[Logo file specification]
File name
Storage location
Size (Note 1)
Number of colors (Note 2)
(Note 1) When the size of the logo file is different from the specified size, the display image may differ from the
actual logo as a result of scaling to fit in the display range.
(Note 2) When the logo file is other than 16-bit color, the display image may differ from the actual color because it
is converted to 16-bit color.
IB-1501268-K
logo.jpg
Windows-based display
non-Windows-based display
VGA
XGA
16 bits
626
D:\Custom
\Custom\
22×80 pixels
32×135 pixels
Advertisement
Table of Contents
