Connecting I/O Device Via Communication Expansion Unit - Mitsubishi Electric M800W Series Connection And Set Up Manual

M800W/M80W Series Connection and Setup Manual
7 Connection of Control Unit

7.13 Connecting I/O Device via Communication Expansion Unit

Mount the communication expansion unit onto the dedicated slot of the control unit.
(Note) The available combinations of the communication expansion units for which two slots can be used are as
follows. Any combination not stated below cannot be used. Either slot can be used.
Case 1
Case 2
Case 3 FCU8-EX561 : CC-Link
Case 4
Case 5
Case 6
Case 7
FCU8-EX564 : CC-Link IE Field
Case 8
Case 9
Case 10 FCU8-EX565 : EtherNet/IP
IB-1501268-K
FCU8-EX561 : CC-Link
FCU8-EX563 : PROFIBUS-DP
FCU8-EX564 : CC-Link IE Field
FCU8-EX565 : EtherNet/IP
FCU8-EX568 : FL-net
FCU8-EX563 : PROFIBUS-DP
FCU8-EX564 : CC-Link IE Field
FCU8-EX565 : EtherNet/IP
FCU8-EX568 : FL-net
FCU8-EX568 : FL-net
268