Connecting With Control Unit - Mitsubishi Electric M800W Series Connection And Set Up Manual

M800W/M80W Series Connection and Setup Manual
12 Connection of Remote I/O Unit

12.4 Connecting with Control Unit

Control unit
RIO3
RIO1
RIO2
(Note) Connect the J210 cable to the RIO1, RIO2, or RIO3 connector of the control unit.
Check the connector position with the actual machine.
Refer to "20.6.2 Connection and Station No. Setting on Remote I/O Unit" for the station No. setting.
IB-1501268-K
Remote I/O 3ch
J210
Remote I/O 1ch
J210
Remote I/O 2ch
J210
316
Remote I/O unit
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points