Table of Contents
Advertisement
M800W/M80W Series Connection and Setup Manual
4 General Specifications
CAUTION
Do not apply any voltage to the connectors other than voltage specified in this manual. Failure to observe this
could cause bursting, damage, etc.
Connect the cables to the designated connectors. Incorrect connections could damage the device.
12V, 5V, and 3.3V output from connectors are to supply the power for dedicated peripheral devices. Do not
use for other equipment to supply the power since we do not guarantee the NC operation by voltage down or
noise sneaking.
(1) OPTH1 (High-speed optical servo communication 1st ch)
(2) OPTH2 (High-speed optical servo communication 2nd ch)
<Cable side connector type>
Connector : LGP-Z0007K
Manufacturer: HONDA TSUSHIN KOGYO
(3) LAN (Ethernet communication)
1
8
1
I/O
TXRXD0+
2
I/O
TXRXD0-
3
I/O
TXRXD1+
4
I/O
TXRXD2+
5
I/O
TXRXD2-
6
I/O
TXRXD1-
7
I/O
TXRXD3+
8
I/O
TXRXD3-
- Connect connector case with FG pattern.
- Use J303 cable when directly connecting a device such as a personal computer to the unit.
<Cable side connector type>
Connector : J00026A0165
Manufacturer: Japan Telegärtner
35
IB-1501268-K
Advertisement
Table of Contents
