Table of Contents
Advertisement
Chapter 1: Getting Started
Step 1. Start the demo
Step 1. Start the demo
A demo program and its associated files are provided with the Graphical User
Interface.
1 Change to the demo directory.
$ cd /usr/hp64000/demo/debug_env/hp64751 <RETURN>
Refer to the README file for more information on the demo program.
2 Check that "/usr/hp64000/bin" and "." are in your PATH environment variable. To
see the value of PATH:
$ echo $PATH <RETURN>
3 If the Graphical User Interface software is installed on a different type of computer
than the computer you are using, edit the "platformScheme" resource setting in the
"Xdefaults.emul" file.
For example, if the Graphical User Interface will be run on a HP 9000 computer
and displayed on a Sun SPARCsystem computer, change the platform scheme to
"SunOS".
4 Start the emulator/analyzer demo.
$ Startemul <logical_emul_name> <RETURN>
This script starts the emulator/analyzer interface (with a customized set of action
keys), loads a configuration file for the demo program, and then loads the demo
program.
The <logical_emul_name> in the command above is the logical emulator name
given in the HP 64700 emulator device table file (/usr/hp64000/etc/64700tab.net).
32
Advertisement
Table of Contents
