The Server Has No Power - Avaya S8800 Installing Manual

Installing the S8800 Server
Troubleshooting steps
Contact your project manager.

The server has no power

Troubleshooting steps
• Make sure that the power cord is plugged into the back of the server and into a
• If the server has a single power supply, it must be installed in power-supply bay 1.
• Make sure that the UPS is plugged into a nonswitched outlet.
• Make sure that the outlet has power.
• Push the power button on the front of the server. See
• Check the power supply LEDs on the back of the server. During normal operation,
22 Installing the Avaya S8800 Server for Modular Messaging
nonswitched outlet or UPS. If the server has a redundant power supply, make sure
that both power supplies are plugged in.
See "Back of server."
21.
the AC LED and DC LED are both lit.
Turning on the server
October 2009
on page