Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 98

3.1.n.7.2 SMS reporting
2 SMS reporting
Off
The SMS reporting menu lets you enable or disable SMS reporting to the
selected user. The reporting can have one of the following states:
•
Always: The reporting is enabled
•
Off: The reporting is disabled
•
Off until re-setting: The reporting is temporarily disabled until the next system
set
This option is editable only if the user belongs to a user group that has the SMS
reporting privilege enabled. See "3.2.n.5 User group options" on page 91 for
more information.
3.1.n.7.3 SMS control
3 SMS control
Disable
The SMS control menu lets you enable or disable SMS control for the selected
user.
This option can be changed only if the user belongs to a user group that has the
SMS control privilege enabled. See "3.2.n.5 User group options" on page 91 for
more information.
Note: SMS control for a user is disabled after 10 attempts to perform an
unauthorized SMS command. See Advisor Advanced SMS Control Reference
Manual for more information.
3.1.n.8 Delete user
To remove a user, select a user using the cursor, or by entering the user number,
and go to the Delete user menu.
The display shows:
8 Delete user
>Cancel<
Choose Ok and press Enter. This removes the user.
Repeat the command to delete other users, or press Clear to exit and return to
the higher menu level.
Note: You cannot delete a user unless your user group authorizes you to do so.
88 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual