Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 37

Standard onboard outputs
S1, S2
S3, S4, S5 [1]
[1] Maximum cable length for low current output connection may not exceed 30 m. For longer
distances, use relay output expansion (for example, ATS624 four-relay expander).
Environmental
Operating temperature
Tested temperature according
EN 50131
Humidity
IP protection grade
Colour
Dimensions
EN 50131 grade and class
Safety class
Enclosure type
Overvoltage category
Maximum altitude, or minimum air
pressure
Fuses
Battery
12 V aux
System databus
Siren 1, high current output S1
Siren 2, high current output S2
Mains, mains fuse:
ATS1000A(-IP)
ATS2000A(-IP)
Note: Mains fuse is part of the mains terminal block.
WARNING: Before removing the mains fuse, mains power must be disconnected
(see "Mains power connection" on page 8).
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
High current electronic output, rating: 1 A at 13.8 V
Low current electronic output, rating: 50 mA at 13.8 V
0 to +40°C
−10 to +55°C
95% noncondensing
IP31
Beige
See "List of panel variants" on page vi
ATSx000A(-IP): Grade 2, Class II
Class I
Enclosure (meets UL94V-0)
Category II
2000 m above mean sea level
2 A, resettable
1 A, resettable
1 A, resettable
1 A, resettable
1 A, resettable
315 mA, fast 20x5
630 mA, fast 20x5
27