Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 115

Note: This menu is only available for a wireless expander ATS1235 with
firmware version 1.13 or newer, which is online.
4.1.n.7.1 Sensor ID
1>Sensor ID
10EBA9E
The screen allows you to view the sensor ID.
Note: First two digits of the sensor identifier also define the sensor type. See
Table 27 below.
4.1.n.7.2 Sensor type
2>Sensor type
DWS
The screen allows you to view the sensor type. The following sensor types are
available:
Table 27: Wireless sensor types
Type Description
Repeater Wireless signal repeater
CO Carbon monoxide sensor
DWS Door/Window sensor
Smoke sensor Smoke sensor
PIR Passive infrared detector
2 button panic 2 button panic sensor
Shock sensor Shock sensor
Sound sensor Glass break sound sensor
PIR camera sensor Wireless PIR camera
4.1.n.7.3 Supervision
3 Supervision
>Off<
Enables or disables the wireless device supervision. Supervision of all types
becomes active. See "2.2.2.n.4.4 Supervision" on page 77 for more details.
4.1.n.7.4 Sensor opt
4 Sensor opt
>Ignore alarm<
Sensor options depend on the type of the wireless device.
See an appropriate RF device manual for more information on available options.
The following options may be available.
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
ID
0A*
0D*
10*
11*
12*
14*
18*
1A*
23*
105