Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 102

# Option
8. User adding (none /
restricted / all)
9. Forced set
10. Change PIN
11. Walk test
12. Engineer reset
13. Duress code
14. Reporting tests
15. Remote connection
16. Cleaner
17. User group area list
18. Menu access
19. Inst. access
20. Logs access
21. Stop report
22. SMS reporting
23. SMS control
24. Card and PIN mode
25. No OP/CL reports
26. Door access
27. Schedule access
28. Fob learning
29. Remote pics
30. Pic deletion
31. CS configuration
92
Description
Create new users (see also "User privilege limitation" on page 93).
Perform a forced set.
The availability of this option depends on the system configuration.
Change own PIN.
Perform a walk test.
Perform an engineer reset.
Use a duress code.
Make a test call to the particular central station.
Respond to a remote access request.
Leave zones inhibited after the unset.
Display the list of areas.
Enter the user menu.
Grant the Installer an access to the system configuration.
Access the panel logs.
Stop reporting in progress.
Receive SMS reports.
Control the system via SMS.
Set the mode for this particular user group (if possible). The
following modes are available:
•
PIN only
•
Card only
•
Card or PIN
Open/close events are not reported.
Open doors using selected keypads (1 to 8).
Access to schedule. The following options are available:
•
None: No access
•
View: Restricted access. Users can view schedule and cancel
actions for the present day.
•
Configure: Full access.
Program a fob.
Enable remote picture triggering.
Delete pictures.
Configure CS communication
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual