Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 136

Use the Trigger name screen to enter or change the trigger name. The trigger
name can contain up to 16 characters.
6.3.n.2 Delete trigger
To remove a trigger, select a trigger using the cursor, or by entering the trigger
number, and go to the Delete trigger menu.
The display shows:
2 Delete trigger
>Cancel<
Choose Ok and press Enter. This deletes the trigger.
Repeat the command to delete other triggers, or press Clear to exit and return to
the higher menu level.
Note: You cannot delete a trigger unless your user group authorizes you to do
so.
126 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual