Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 101

# Option
27. Schedule access
28. Fob learning
29. Remote pics
30. Pic deletion
31. CS configuration
Y/N :Default option value (yes or no)
[Y/N]: Option is read only.
(U): Option can be changed by a user programmable function. See "User programmable
functions" on page 193.
For detailed descriptions of user group options see "3.2.n.5 User group options"
below.
3.2.n.3 User group areas
3 UG areas
>1.......<
The User group areas option defines which areas the user can control.
3.2.n.4 User group filter
4>UG filter
Not used
When using a filter, the user rights defined by the user group depend on this filter
state.
For more information on condition filters, see "6.1 Condition filters" on page 117.
3.2.n.5 User group options
5>UG options
>>>
User group options define the user access rights to the particular options. The
following options can be configured.
Table 24: User group options as user privileges
# Option
1.
Full set
2. Part set 1
3. Part set 2
4. Unset
5. Inhibit
6. Isolate
7. Time and date
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
Normal
user
N (U)
N (U)
N (U)
N (U)
N (U)
Description
Set the premises.
Perform a partial set 1.
Perform a partial set 2.
Unset.
Inhibit zones.
Isolate zones, bus devices, cameras etc.
Change system time and date.
User group
Supervisor Installer
Y (U) [Y]
Y (U) [Y]
N (U)
N (U)
Y (U) [Y]
Guard
Y (U)
N (U)
N (U)
N (U)
N (U)
91