Table of Contents
Advertisement
Calendar
7 Calendar
1>Actions
>>>
The Calendar lets you to configure an automatic execution of specific actions at
particular time and date. Panel settings can be automatically adjusted according
to the schedule.
The Calendar functionality is based on actions. Every action has the following
settings:
•
Name
•
Start time: Day time to trigger the action on
•
Condition filter: An additional filter that must be active to enable the action
•
Activation: Enabled, disabled, or disabled temporarily
•
User function: See "User programmable functions" on page 193.
The actions can be grouped into Action lists, which can contain up to 8 actions.
This menu let you to configure schedule Exceptions. Exceptions represent
particular time periods when everyday actions are expanded or substituted by
other actions. An example of exception is a holiday, when the premises must
stay set for 24 hour.
Finally, this menu provides a Schedule configuration possibility. The Schedule
allows configuration of actions taken on a weekly basis.
Daylight saving note
Actions planned between 2:00 and 3:00 on daylight saving time change do not
occur when clocks are advanced, and occur twice when clocks are rewound. To
avoid this scenario, apply appropriate exceptions on programmed daylight
change days (see "Exceptions" on page 133).
For more information on daylight saving programming, see "8.1.1 Time and date"
on page 138.
Viewing calendar
7.1 View
1>Current view
2 Date view
Use the View menu to see actions, action plans, and exceptions provided by the
selected schedule for the particular day.
This menu also allows users to cancel particular actions planned for the present
day.
Note:
When calendar settings change, all cancelled actions become active
again.
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
127
Advertisement
Table of Contents
Troubleshooting
