Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 112

4.1.n.6.27 Sensor type
27 Sensor type
>Low temp.<
The events reported by a technical zone depend on the type of the sensor
connected. The Sensor type option specifies what is the sensor and what events
it should report. The following sensor types are available:
•
Low temperature detector
•
High temperature detector
•
Gas detector
•
Water detector
•
Fire alarm
•
Generic
Table 26 below lists events that may be reported for each sensor type.
Table 26: Sensor types and reported events
Sensor Type Code
Low temp. SIA
CID
Gas SIA
CID
High temp. SIA
CID
Water SIA
CID
Fire SIA
CID
Generic SIA
CID
See also "Reporting codes used in Advisor Advanced" on page 223.
4.1.n.6.28 Virtual zone
28 Virtual zone
Not set
The menu allows mapping the selected zone to an existing output.
If an output is not set, the zone state follows the state of the physical input
assigned.
If an output is selected, the zone becomes a virtual zone that is active, when the
selected output is active. In this case the physical input has no effect on the
zone.
102
Alarm Alarm
restore
ZA ZR
E152 R152
GA GR
E151 R151
KA KR
E158 R158
WA WR
E154 R154
FA FR
E110 R110
UA UR
E150 R150
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
Bypass Unby-
pass
ZB ZU
E570 R570
GB GU
E570 R570
KB KU
E570 R570
WB WU
E570 R570
FB FU
E570 R570
UB UU
E570 R570
Super- Super-
vision vision
long restore
ZS ZJ
E381 R381
GS GJ
E381 R381
KS KJ
E381 R381
WS WJ
E381 R381
FT FJ
E373 R373
ZS ZJ
E381 R381