Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 147

7.5.n.5 Week days
1>Monday
2 Tuesday
The Week days menu allows you to assign actions and action lists to each day of
the week.
Choose a day of the week to assign actions and action lists.
1>Actions
2 Action lists
Go to the Actions submenu to assign or remove actions for the selected day of
the week.
1>Action 1
2 Not set
Choose previously configured actions to configure the schedule.
There can be 16 actions programmed.
Choose "Action" to select an action.
Choose "Remove" to remove an action from the selected day.
Go to the Action lists submenu to assign or remove action lists for the selected
day of the week.
1>Not set
2 Not set
Choose previously configured action lists to configure the schedule.
There can be 4 action lists programmed.
Choose "Action list" to select an action.
Choose "Remove" to remove an action list from the selected day.
7.5.n.6 Exceptions
1>Not set
2 Not set
You can assign up to 64 exceptions to the schedule. See "7.4 Exceptions" on
page 133 for more details.
7.5.n.7 View
1>Current view
2 Date view
Use the View menu to see actions, action plans, and exceptions planned for the
particular day according to selected schedule.
This menu is similar to "7.1 View" described on page 127, except it applies only
to the selected schedule.
This menu also allows users to cancel particular actions planned.
Note: When calendar settings change, all cancelled actions become active
again.
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 137