Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 49

How to program Yes/No options
01 Zone alarm
>Yes<
•
Up and Down arrow keys: Toggle between options
•
Enter: Confirm the entry
How to edit text
1 Area name
>Area 1 <
Keys 1 to 9 have alphabetical characters printed above them. To enter a letter,
press the key the number of times relative to the position of the letter. Both upper
and lower case letters are available as well as numerical values and spaces. See
"Keypad layout" on page 40.
•
1 to 0: Enter a character
•
Up: Delete a character
•
Down: Backspace
•
Left and Right: Move the cursor
•
Function, and then Left: delete text backwards
•
Function, and then Right: delete text onwards
•
Enter: Confirm the entry
•
Clear: Exit without changes
See also "Word library" on page 41.
How to edit a list
5 Areas
>12.4....<
•
Up and Down: Toggle the value under cursor
•
0: Include or exclude all values in the list
•
Left and Right: Move the cursor to a specific item
•
Enter: Confirm the entry
•
Clear: Exit without changes
How to edit a host address
Host name
> <
Using the same rules as described in "How to edit text" above, enter one of the
following:
•
An IP address as nnn.nnn.nnn.nnn. For example, 192.168.1.20.
• A host name as a text string. For example, "utc.com". In this case DNS server
must be configured in "9.3.n.5 DNS config" on page 176, and must be
available.
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 39