Autoset
The Advisor Advanced system allows autoset configuration. The system can be
set automatically via schedule.
The following options must be considered when providing an autoset facility.
•
Using menu "7.2 Actions" on page 129, create an action with Set function.
See also "User programmable functions" on page 193.
•
Configure an appropriate schedule as described in menu "7.5 Schedules" on
page 136 and make sure it is active.
•
Enable or disable "5.n.9 Silent set" option on page 115.
•
If necessary, set "5.n.8 Autoset retry" option on page 115.
If Set retry is allowed, configure "8.4.7 AS user retry" on page 151.
•
Set "5.n.4 Warning time" option on page 114 as well.
•
Optionally, configure "8.4.6 AS fault retry" option on page 151.
196
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual