Pstn Specific Options - Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual

If Line fault is set to "If used", the line is being tested only if this path is used for
any central station communication, and the account number for this station is set.
9.3.n.4 Expander menu
4 Expander menu
>>>
Particular diallers have their internal menus. Enter Expander menu to set internal
dialler options.
The menu content depends on the equipment.

PSTN specific options

9.3.n.3 Line fault delay
3 LF delay
>0<
Line fault delay defines the time period after which the PSTN line fault is reported
to the central station. If the fault restores before this time expires, no fault is
reported.
The allowed range is 0 to 255 s.
9.3.n.4 Transm path
3 Transm path
PSTN
The Transmission path option is a read-only field that identifies a communication
method used for this transmission path.
9.3.n.5 Dial tone
5 Dial tone
>Default<
The Dial tone menu allows you to choose an appropriate dial tone standard for
PSTN paths.
One of the following dial tone options can be selected:
•
None
•
Default (CTR21)
•
UK
•
Other (Netherlands)
9.3.n.6 Dialing
6 Dialing
>DTMF<
The Dialling menu allows you to select the PSTN dial mode: pulse or tone
(DTMF).
174 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual