Interlogix Advisor Advanced ATS 000A Series Installation And Programming Manual page 144

7.4.n.3 Stop date
3 Stop [dd.mm]
>01.01<
Enter the last day of the exception in DD.MM format.
7.4.n.4 Year
4 Year
>All<
Enter the year of the selected exception. The allowed range is 2000 to 2099.
Value below 2000 is equal to All.
7.4.n.5 Week days
1 Monday
>Yes<
Define if the exception is valid for particular days of the week.
7.4.n.6 Substitute
6 Substitute
>On<
If the Substitute option is set to On, only actions and action lists assigned to this
exception are performed during the exception time. If the option is set to Off, the
exception actions are executed together with the other actions that must occur at
the configured time.
7.4.n.7 Active
7 Active
>Off<
The Exception activation menu allows you to disable or enable the exception
permanently.
7.4.n.8 Actions
1>Action 1
2 Not set
Choose previously configured actions to configure the exception.
An exception can contain up to 4 actions.
Choose "Action" to select an action.
Choose "Remove" to remove an action from the exception.
7.4.n.9 Action lists
1>Not set
2 Not set
Choose previously configured action lists to configure the exception.
134 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual