Table of Contents
Advertisement
9.3.n.6.2 SMS forwarding
0>Off
-------------
The SMS forwarding menu lets you choose the phone number to which all
unrecognized messages are forwarded (usually the supervisor's or
administrator's phone). You can also switch off SMS forwarding using this menu.
The list contains only those users who:
•
Have the appropriate privileges to receive SMS messages (see "3.2.n.5 User
group options" on page 91)
•
Have their phone numbers configured (see "3.1.n.7.1 User phone" on page
87)
9.3.n.6.3 Max Msg 24h
3 Max Msg 24h
>
<
You can limit the maximum number of SMS messages sent to users during a 24-
hour period. If this limit is reached, further incoming messages are ignored by the
system.
The SMS reports and unrecognized SMS commands have two separate
counters. However, the maximum limit defined in this menu is the same for both
counters.
There is no limit for messages if this value is set to 0.
9.3.n.6.4 SMS header msg
4 SMS header msg
>
<
The SMS header message identifies the Advisor Advanced system. It is included
at the beginning of each text SMS message sent by the system, if the reporting
format is set to SMS text. See "9.1.n.3 Protocol" on page 164
9.3.n.6.5 User PIN req.
5 User PIN req.
>No<
If the User PIN required option is set to Yes, you must start every SMS control
message with your PIN, otherwise the command will be rejected. See the Advisor
Advanced SMS Control Reference Manual for more information.
9.3.n.6.6 Ext.charset
6 Ext.charset
>No<
The Extended charset (UCS2) option has an influence on the SMS messages
sent by the Advisor Advanced system to the user. This option must be set to Yes
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
183
Advertisement
Table of Contents
Troubleshooting
